Flat Roof

Residential Flat Roof in Scottsdale AZ

Foam Roof Scottsdale

Flat Roof

Arizona Residential flat roofs must withstand the extreme climate in our great state, as we have years of experience in commercial roofing, including apartments, churches, schools, restaurants, office buildings, industrial complexes, banks, retail stores, and more. Most commercial roofs are notably flat with little pitch. This is a less expensive alternative for large spaces and allows the air conditioning units to be stored on the roof rather than taking up room in the building or property. Some county or state laws do not permit HVAC unit location within the building for safety reasons and a flat roof provides a space to do this. Flat roofs are less expensive than a traditional roof, are tough and are long-lasting. It is to choose the right material in covering your flat roof. 

There are two highly effective types of flat roofs we offer:
  • Foam spray is a lightweight product that establishes a strong, well-insulated roof. It is installed seamlessly, so it eliminates the chance of leaks. Our foam roof also gets a UV protectant coat for a life expectancy of 20 years or more. Foam is one of the best solutions to keeping your home free of leaks and energy efficient.
  • EPDM is a synthetic, single-ply rubber roofing that is both cost-effective and resilient. The product is made with ethylene and propylene, which come from oil and natural gas. It is typically made of a layer of insulating board covered with rubber product. EPDM is commonly used for flat or low-slope roofs. The installation is usually done by full glue adherence, mechanically attached with fasteners, or ballasted with stone. The seams are sealed with industrial-grade tape or liquid adhesive.
Don't know what you want or need in a new roof, no problem, as we will learn what matters most to you and then we can together determine your best options that fit your needs and budget.

Flat Roof Installation Services

If you need a new roof, you might want to consider our flat roofing installation services in Scottsdale AZ. Our roofers have extensive experience in flat roof construction and will take care of every detail, including beveling the corners and smoothing out edges. The entire process usually takes from one to two days, depending on the size of your roof and the number of layers. Whether your flat roof is a small residential roof or a commercial one, our contractors have you covered. Our flat roof installation services are offered by our licensed roofing contractor in Scottsdale, AZ. Our roofing professionals have extensive experience installing and repairing flat roofs. The material used for flat roofs is specifically designed for this type of structure, so our contractors use the best materials. We will also inspect and repair your roof afterward, so you can rest assured your roof is in good hands. Flat roofs are also more affordable than sloping roofs, so they're an excellent option for homes and commercial properties that need regular maintenance.

If your flat roof is showing signs of wear and tear, it might be time to consider a new roof. A professionally installed roof can increase energy efficiency in your home, resulting in lower energy bills. The new roof will also improve your home's curb appeal and protect your home from harmful weather elements. When you need a new flat roof, it is best to hire a professional. A general contractor or a residential roofer may not be as experienced with flat roofing, and a mistake could result in a leaking roof. Leaks caused by flat roofing can cost hundreds or even thousands of dollars. Hiring a qualified roofing contractor is essential for minimizing interior damage and repair costs.


With flat roofing in Scottsdale, AZ, you will enjoy a new world of space for your home, both indoor and outdoor. A flat roof will allow you to save space on the inside and make more space on the top floor and attic. Flat roofing will increase the value of your home and give it a distinct look. Our roofing services which includes leak detection, replacement and maintenance can help you get the flat roof you need at an affordable price. Our team of roofing professionals will take care of all the necessary details so you can focus on enjoying the benefits of your new roof! Contact our local flat roofing contractor in Scottsdale, AZ today to learn more about their services. After all, they can provide free estimates and estimate for all roof repair and installation services.

Why Choose Flat Roof?

In addition to being more affordable than other roofing systems, flat roofs are more aesthetically pleasing. There are several types of flat roofs available on the market today, so homeowners are encouraged to choose the style that best suits their home's architecture. It is important to consider your budget, as well, before making the final decision. In the long run, a flat roof will increase the value of your property and make your home the talk of the neighborhood in Scottsdale, AZ.

  • Easy to Maintain

    Flat roofs can get dirty very easily and often require regular cleaning. Keeping your flat roof clean is essential for preserving its attractiveness. Ensure your drains are not clogged with leaves and ice, and clean them regularly. Using a leaf-blower or a pressure washer to clear away algae and moss can also help prevent damage to your flat roof. And remember, if you're a homeowner, you should also pay attention to the gutters on your home.


    Despite the low cost of flat roof repair, it is important to perform regular routine maintenance. This includes inspections and minor repairs. It is a wise decision for home owners with flat roofs to invest in regular maintenance services. While they may require more maintenance, these preventative measures will save you money in the long run. You'll need to do periodic inspections to make sure they're in good shape and free of debris.

  • Safer to Walk On

    Flat roofs are extremely dangerous to walk on. This is because they typically have two slopes and the area beneath them is much smaller than the area above. However, flat roofs are often used for recreational purposes, as well as extra storage space. Because they are used for a wide range of activities, flat roofs must be designed properly to withstand foot traffic and weight. Fortunately, there are several ways to make a flat roof safer for people to walk on. A flat roof has the added benefit of not presenting the same dangers as a pitched roof. However, there is still a risk of slipping or damaging the roof. The safest way to walk on a flat roof is to use a walking pad or to lay boards across the roof. While walking on a flat roof is safer than a pitched one, you should always be extra careful and wear soft shoes.


    To prevent injuries, always wear safety gear while walking on a flat roof. A safety harness system is essential for homes with multiple stories. Always follow safety regulations when using a ladder. Place the ladder on level ground and ensure there is someone at the bottom to assist you if you fall. Also, make sure to always lay the ladder flat on the ground when you are not present. This will prevent any unnecessary injuries or falls.

  • Energy Efficient

    Energy efficient flat roofs can be installed quickly and affordably. These roofs can also be converted into a rooftop garden to save even more energy. Cleaning a flat roof is critical to its success. Besides preventing snow from building up on the surface, you must ensure that it is free from debris, such as leaves and branches. A flat roof that gets a buildup of dirt and other debris can cause drainage problems. Clean up these areas regularly, as a dirty roof will make your home look drab and unattractive. Also, make sure that any patio furniture or other equipment is protected from the elements and foot traffic.


    Insulation plays a significant role in lowering energy bills. Even a difference of 8 degrees in internal temperature requires an enormous amount of energy to cool. With an insulation flat roof, building owners can reduce the internal temperature of the building without sacrificing comfort or aesthetics. This means fewer energy bills for you and a lower carbon footprint. 


    Flat roofs have one major advantage over pitched roofs: they allow full sun exposure. On the other hand, sloped roofs can only catch sunlight at certain angles. Additionally, sloped roofs have a higher surface area, so every square foot of sloped surface is accounted for in the cost of materials and labor. So it is advisable to choose a surface that fits your needs the best. That way, you can save energy and money.

What to Look for in a Flat Roof?

You've probably seen advertisements for a new flat roof, but do you know what to look for? This article will cover some of the things to look for in a flat roof - the cost, inspections, and maintenance. A good flat roof will be sturdy, but it also has to be well maintained and inspected. Here's what to look for before making the final decision:

Cost

The price of a flat roof varies depending on the area in which the project is to be carried out. There are a few basic characteristics that you need to consider when comparing the cost of a flat roof. These include the number of stories, the labor involved in loading materials onto the roof, and the need to secure hydro wires and pedestrian walkways. A flat roof can vary considerably in price, depending on the materials used in its construction. It is also possible to hire a specialist roofer to install a flat roof for a fraction of the cost of a traditional roofing job. The construction of a flat roof requires less materials and less time than a traditional roof. A flat roof also keeps a home warmer because it allows sunlight to penetrate its entire surface area. Considering this, a flat roof can save you money on energy bills. The cost of a flat roof is determined by several factors. The size of the house, the expertise of the laborer, and the materials used. The most common flat roofing materials are felt, rubber, fiberglass, and lead. Depending on the level of insulation needed for your roof, the cost of a flat roof can vary by more than two hundred dollars per square foot.

Maintenance

Maintaining a flat roof is critical for its long-term performance. Regular inspections for rips or punctures can prevent larger issues from arising, which can cost substantial amounts. As the flat roof ages, regular inspections of flashings, penetrations, and ponding areas should be done. Leaks or damage in any of these areas should be investigated as early as possible to avoid more costly repairs or roof replacement. A flat roof membrane can last between twenty to thirty years before it begins to deteriorate. During this time, perimeter flashings and membrane seams may begin to fail. Left unchecked, these components could fail prematurely, ruining the entire roof system and costing homeowners a significant amount of money. Regular inspections are essential for a flat roof to retain its attractiveness. Regular inspections are also crucial to prevent major damage and wear. Frequent inspections should be performed every few months or every three months. These inspections will help prevent water damage, reduce the risk of mold growth, and gauge the roof's ability to withstand harsh weather conditions. By doing regular inspections, building owners can ensure the longevity of their flat roofs and avoid costly repairs down the road.

Lifespan

When determining the life of a flat roof, there are several things to consider. The materials used to cover the roof play a big role in this factor. Asphalt, for instance, has a 10-year life span. Multi-layer built-up roofs can last between 15 and 20 years, but they tend to be heavier and have a shorter lifespan. For this reason, many people opt for other types of roofs. Rubber roofing membranes are an excellent choice for flat roofs because of their resistance to UV rays and temperature variations. Additionally, these roofing materials are recyclable at the end of their life. Although many types of flat roof materials last for over 20 years, they must still be regularly inspected to ensure that they continue to meet their intended lifespan. The life span of a flat roof varies based on several factors, the main ones being the quality of the materials used, the quality of installation, and the relationship between the manufacturer and the roofer. Ultimately, however, the lifespan of a flat roof depends on the maintenance and care provided by the homeowner. If properly maintained, a flat roof will last for 20 to 30 years, if properly cared for.

Inspection

Performing regular inspections of flat roofs is critical for its long-term durability. Deterioration in any of these areas will lead to leaks. Water can seep in through cracks or deteriorate wooden structures on the roof, causing damage. These problems are often more subtle, and may be difficult to detect. A thorough inspection which may include leak detection will identify problems and prevent them from escalating to the point of requiring replacement. A roof inspector will provide a list of items that should be repaired or replaced. The professional roof inspector will also be able to tell if any damage has occurred. Invasive inspections can involve removing a small section of roof. These are more accurate in assessing structural damage and can save you money by avoiding the need for a new flat roofing system. Moreover, invasive inspections can be performed on both flat roofing membranes and tiled pitched roofs. Regular inspections of flat roofs can also help you spot smaller issues that can become major problems if left unattended.

Share by: